SESSIONS ON-DEMAND
Day 1 – Facilitating Clean, Connected and Electrified Technology
Mon, 21 Sep, 2020

10:30-11:30
Plenary Discussion – Overcoming Business Continuity Challenges Caused by COVID-19 and Maximizing Opportunities in the Sustainable Technology Market

Session description:

Advanced ceramics are a key material in the transition to a cleaner, electrified and more efficient future. A plethora of technological advancements are being enabled by the disruptive potential of these materials.  A selection of industry leaders will discuss the potential for growth in these areas whilst also addressing the long-term effects of COVID-19.

Points to be discussed:

  • What opportunities do advanced ceramic materials provide as a disruptive technology for environmentally friendly applications?
  • Changes in market requirements over the next five years and how this can benefit and challenge the advanced ceramics industry
  • Can business continuity be ensured through disaster planning and supply chain shortening?
  • Is the stock piling of materials an effective way of combating economic uncertainty?

​​​​​​​​​​​Moderator:
Eileen De Guire, Director of Technical Content and Communications, The American Ceramic Society


Speakers:

Michael Silver, CEO, American Elements
Steve Pawlowski, Director Automotive Strategy, CoorsTek Inc.
Mark Wolf, Vice President, Fine Ceramics Group, Kyocera

12:00-13:00
Panel - Powering a Mobile Future: The Role of Ceramics in Taking Solid State Batteries from Theory to Practice and Improving Lithium Ion Models

Session description:
Points to be discussed:

  • What are the key challenges in the testing, characterization and development of advanced ceramics and glass in solid state batteries?
  • What improvements can be made to the energy density of lithium ion batteries using ceramic materials?
  • How can ceramic components deal with the challenge of thermal management in batteries?
  • How can the fragility of ceramic or glass cathodes be effectively countered?

Moderator:
Lincoln Miara, Senior Staff Scientist, Samsung Research America

​​​​​​​​​​​Speakers:
Alevtina (Alla) Smirnova, Associate Professor, SDSMT
Asma Sharafi, Research Engineer, Ford Motor Company

13:30-14:15
Interview: Maximising Advanced Ceramic Materials as the Disruptive Technology for Electronic Packaging and Assembly

Session description:
Electronic circuitry is an exciting growth area for the technical ceramics industry though there are challenges in expanding their production. Advanced ceramic materials are still relatively expensive when compared with their non-ceramic counterparts and take more time and expertise to produce. This interview will address the versatility of ceramic materials and outline ideas of how to maximize their usage in electronic circuitry. Points to be addressed:

  • Ceramic substrates as a disruptive technology to alternate materials
  • Discovering the latest market growth areas for ceramic substrates
  • Overcoming the commercialization challenges for ceramic substrate production  

​​​​​​​​​​​Speakers:
Mark DiPerri, Business Development Manager, Toshiba America Electronic Components, INC.

 

Day 2 – Additive Manufacturing
Tue, 22 Sep, 2020

 

10:30-11:30
Panel - Overcoming Quality and Consistency Challenges for the Additive Manufacturing of Ceramic Materials

Session description:
Producing ceramic materials of a consistent quality can be challenging, especially when implementing a new technology such as additive manufacturing. By implementing stringent standards on the ceramic materials produced through additive manufacturing, manufacturers will be able to unlock the potential for more efficient production methods with reliable results.
Points to be discussed:

  • Can additive manufactured materials meet the required quality needed for the advanced ceramic supply chain?
  • What progress has been made in the field of material characterization and testing standardization of additive manufactured advanced ceramics?
  • How do ceramic materials differ from other additive manufactured materials which have already been commercialized such as metals and polymers?

​​​​​​​​​​​Moderator:
Navin Sakthivel, Additive Manufacturing Process Engineer, Baker Hughes

Speakers:
Holly Shulman, Professor Ceramic Engineering, Alfred University
Jason Jones, Global Materials & Process Engineer, Moog
Mohsen Seifi, Global Director, Additive Manufacturing, ASTM International
Haim Levi, Vice President, XJet

12:00-13:00
Panel - Further Integrating Additive Manufacturing into the Production of Technical Ceramics

Session description:
It has also become more important than ever to produce ceramic materials in a timely and cost-effective manner. Join our experts as they discuss the implementation of additive manufacturing and the ways in which it can help to overcome the slow processing of ceramic products.
Points to be discussed:

  • What are the key production challenges for ceramics and glass that additive manufacturing could help or are helping to overcome?
  • How can the additive manufacturing sintering process be improved to increase yield quality?

​​​​​​​​​​​Moderator:
Navin Sakthivel, Additive Manufacturing Process Engineer, Baker Hughes


Speakers:
Peter Durcan, Vice President, 3DCERAM-SINTO
Shawn Allan, Vice President & Materials Engineer, Lithoz America

 

Day 3 – Aerospace Applications
Wed, 23 Sep, 2020

10:30-11:30
Panel - Actualizing Commercialization: Taking Aerospace Applications from Conception to Completion

Session description:
The commercialization of advanced ceramic materials has always proven to be a challenge no matter the application. Whether it be cost related, through the limitations of raw material availability, complications in the production process or merely the amount of time taken to produce and test a product, mass producing ceramics is a challenge as old as the industry itself especially for aerospace. This is due to stringent safety guidelines and sheer cost. The experts will discuss how best to overcome these challenges.
Points to be discussed:

  • How can the volume control of ceramic production be surpassed? What is stopping the mass production of inherently useful components?
  • How can the consistency and density of a new material become uniform enough for production?
  • What new technological innovations could help to streamline manufacturing processes?

​​​​​​​​​​​Speakers:
​​Landon Mertz, Chief Executive Officer, Cerion Nanomaterials
Rudolph Olson, GM and CTO, CFOAM LLC
Mano Manoharan, Chief Technologist, Ceramic Composites and Coatings, General Electric Aviation
Michael Badding, Sr. Research Associate, Corning R&D Corporation

12:00-13:00
Panel - Addressing the Challenges of Ceramic Matrix Composite (CMCs) Commercialization

Session description:
Points to be discussed:

  • What innovation can we expect within the next five years in the world of CMCS?
  • How can the unpredictability of ceramic fiber matrix interactions be reduced?
  • How can CMCs be effectively fastened to other engine components made of differing materials?

​​​​​​​​​​​Speakers:
Richard White, Principal Consultant – Materials, Lucideon Limited
Jonathan Blank, CMC and Coatings Materials & Processes Section Leader, GE Aviation
Shay Harrison, Senior Materials Scientist, Free Form Fibers LLC
Andrei Evulet, Co-Founder and CEO, Jetoptera



 

13:30-14:15
Topic Table – How to Improve Processing and Machining Efficiency in Order to Reduce Production Time and Cut Costs?

Session description:
During this 45-minute virtual roundtable you will get the opportunity to consult the experts on how to increase the efficiency of your processing and machining technology.
Get advice on:

  • How to make improvements to processing and sintering techniques and equipment?
  • How can processing and machining be done more cost efficiently?
  • How to improve the speed at which ceramic materials are processed?

​​​​​​​​​​​Speakers:
Andrew Perry, Group Ceramic Processes Leader, Lucideon Limited
Dhruba Panthi, Assistant Professor, Kent State University

 

Day 4 – Quality and Testing
Thu, 24 Sep, 2020

10:30-13:30
Panel– Improving Ceramic Materials and its Production through Dynamic Temperature analysis and Process Modelling

Session description:

Points to be discussed:

  • How can ceramic manufacturers best utilize these techniques to improve their product?
  • How may these techniques improve the efficiency of ceramic material production?
  • What is the biggest challenge that these techniques will help to overcome?

​​​​​​​​​​​Moderator:
Landon Mertz, Chief Executive Officer, Cerion Nanomaterials

Speakers:
Denny Matthew Alex, Research Assistant, Otto von Guericke University
Herbert Mucha, Application Scientist, NETZSCH Gerätebau

 

12:00-13:00
Panel - Improving Supply Chain Efficiency Through Material Testing Standardization and Accuracy

Session description:
It can be challenging to produce ceramic materials to a consistent standard. The incongruities between components made using the same raw materials and equipment can be significant. The ability to accurately and consistently analyze ceramic materials at the various stages of its processing are key to countering and determining the origins of these inconsistencies.
Points to be discussed:

  • What machining capabilities do manufacturers want prioritized by their suppliers?
  • How can consistency be fostered across the manufacturing process as a whole?
  • How can the quality and testing analysis of ceramic materials be improved?

​​​​​​​​​​​Speakers:
Bill Walker, Manager, Materials Engineering, Tenneco Powertrain
Nathan Henderson, Sr. Applications Scientist, Bruker Corporation
Rick Passey, Product Marketing Engineer, FEI, A Thermo Fisher Company
Alex Van den Bossche, Managing Director, GrindoSonic

13:30-14:15
Topic Table – How to Improve Your Ceramic Products Material Properties Through Raw Material Optimization?

Session description:
During this 45-minute virtual roundtable discussion attendees have the opportunity to consult ceramic manufacturers and raw material suppliers on how best to improve their product with optimized raw materials.
Get advice on:

  • What additives could best improve the performance of my product?
  • Can material density be significantly increased?
  • What improvements can be made to my polymer derived ceramics?

​​​​​​​​​​​Speakers:
Guillaume De Calan, CEO, Nanoe
Roland Bayer, Application Development Leader, DuPont - Global Speciality Solutions
Processing. Please wait.
Loading...