Sessions

All Sessions
keyboard_arrow_down
keyboard_arrow_down Show filters keyboard_arrow_up Hide filters
  • All Tracks
  • Mon 21 - Facilitating Clean, Connected and Electrified Technology
  • Tue 22 - Additive Manufacturing
  • Wed 23 - Aerospace Applications
  • Thu 24 - Quality and Testing
Mon 21 - Facilitating Clean, Connected and Electrified Technology
Plenary Discussion – Overcoming Business Continuity Challenges Caused by COVID-19 and Maximizing Opportunities in the Sustainable Technology Market
event_note Monday, 21 Sep 2020
query_builder 10:30 - 11:30 | Event time (GMT-5)
query_builder 10:30 - 11:30 | Your time (GMT)
place Online Session
card_travel Panel Discussion
mic English
Plenary Discussion – Overcoming Business Continuity Challenges Caused by COVID-19 and Maximizing Opportunities in the Sustainable Technology Market
Advanced ceramics are a key material in the transition to a cleaner, electrified and more efficient future. A plethora of technological advancements are being enabled by the disruptive potential of these materials.  A selection of industry leaders will discuss the potential for growth in these areas whilst also addressing the long-term effects of COVID-19.
Points to be discussed:
  • What opportunities do advanced ceramic materials provide as a disruptive technology for environmentally friendly applications?
  • Changes in market requirements over the next five years and how this can benefit and challenge the advanced ceramics industry
  • Can business continuity be ensured through disaster planning and supply chain shortening?
  • Is the stock piling of materials an effective way of combating economic uncertainty?
Loading...
Mon 21 - Facilitating Clean, Connected and Electrified Technology
Break
event_note Monday, 21 Sep 2020
query_builder 11:30 - 12:00
card_travel Networking
mic English
Break
Keen to meet new partners and learn about the latest products and technologies?

Make sure to set up meetings in the Networking section and browse the digital exhibition floor under Exhibitors!
Loading...
Mon 21 - Facilitating Clean, Connected and Electrified Technology
Panel - Powering a Mobile Future: The Role of Ceramics in Taking Solid State Batteries from Theory to Practice and Improving Lithium Ion Models
event_note Monday, 21 Sep 2020
query_builder 12:00 - 13:00 | Event time (GMT-5)
query_builder 12:00 - 13:00 | Your time (GMT)
place Online Session
card_travel Panel Discussion
mic English
Panel - Powering a Mobile Future: The Role of Ceramics in Taking Solid State Batteries from Theory to Practice and Improving Lithium Ion Models
  • What are the key challenges in the testing, characterization and development of advanced ceramics and glass in solid state batteries?
  • What improvements can be made to the energy density of lithium ion batteries using ceramic materials?
  • How can ceramic components deal with the challenge of thermal management in batteries?
  • How can the fragility of ceramic or glass cathodes be effectively countered?
Loading...
Mon 21 - Facilitating Clean, Connected and Electrified Technology
Break
event_note Monday, 21 Sep 2020
query_builder 13:00 - 13:30
card_travel Networking
mic English
Break
Keen to meet new partners and learn about the latest products and technologies?

Make sure to set up meetings in the Networking section and browse the digital exhibition floor under Exhibitors!
Loading...
Mon 21 - Facilitating Clean, Connected and Electrified Technology
Interview: Maximising Advanced Ceramic Materials as the Disruptive Technology for Electronic Packaging and Assembly
event_note Monday, 21 Sep 2020
query_builder 13:30 - 14:15 | Event time (GMT-5)
query_builder 13:30 - 14:15 | Your time (GMT)
place Online Session
card_travel Panel Discussion
mic English
Interview: Maximising Advanced Ceramic Materials as the Disruptive Technology for Electronic Packaging and Assembly
Electronic circuitry is an exciting growth area for the technical ceramics industry though there are challenges in expanding their production. Advanced ceramic materials are still relatively expensive when compared with their non-ceramic counterparts and take more time and expertise to produce. This interview will address the versatility of ceramic materials and outline ideas of how to maximize their usage in electronic circuitry.
Points to be addressed:
  • Ceramic substrates as a disruptive technology to alternate materials
  • Discovering the latest market growth areas for ceramic substrates
  • Overcoming the commercialization challenges for ceramic substrate production  
 
Loading...
Tue 22 - Additive Manufacturing
Panel - Overcoming Quality and Consistency Challenges for the Additive Manufacturing of Ceramic Materials
event_note Tuesday, 22 Sep 2020
query_builder 10:30 - 11:30 | Event time (GMT-5)
query_builder 10:30 - 11:30 | Your time (GMT)
place Online Session
card_travel Panel Discussion
mic English
Panel - Overcoming Quality and Consistency Challenges for the Additive Manufacturing of Ceramic Materials
Producing ceramic materials of a consistent quality can be challenging, especially when implementing a new technology such as additive manufacturing. By implementing stringent standards on the ceramic materials produced through additive manufacturing, manufacturers will be able to unlock the potential for more efficient production methods with reliable results.
Points to be discussed:
  • Can additive manufactured materials meet the required quality needed for the advanced ceramic supply chain?
  • What progress has been made in the field of material characterization and testing standardization of additive manufactured advanced ceramics?
  • How do ceramic materials differ from other additive manufactured materials which have already been commercialized such as metals and polymers?
Loading...
Tue 22 - Additive Manufacturing
Break
event_note Tuesday, 22 Sep 2020
query_builder 11:30 - 12:00
card_travel Networking
mic English
Break
Keen to meet new partners and learn about the latest products and technologies?

Make sure to set up meetings in the Networking section and browse the digital exhibition floor under Exhibitors!
Loading...
Tue 22 - Additive Manufacturing
Panel - Further Integrating Additive Manufacturing into the Production of Technical Ceramics
event_note Tuesday, 22 Sep 2020
query_builder 12:00 - 13:00 | Event time (GMT-5)
query_builder 12:00 - 13:00 | Your time (GMT)
place Online Session
card_travel Panel Discussion
mic English
Panel - Further Integrating Additive Manufacturing into the Production of Technical Ceramics
It has also become more important than ever to produce ceramic materials in a timely and cost-effective manner. Join our experts as they discuss the implementation of additive manufacturing and the ways in which it can help to overcome the slow processing of ceramic products.
Points to be discussed:
  • What are the key production challenges for ceramics and glass that additive manufacturing could help or are helping to overcome?
  • How can the additive manufacturing sintering process be improved to increase yield quality?
Loading...
Tue 22 - Additive Manufacturing
Break
event_note Tuesday, 22 Sep 2020
query_builder 13:00 - 13:30
card_travel Networking
mic English
Break
Keen to meet new partners and learn about the latest products and technologies?

Make sure to set up meetings in the Networking section and browse the digital exhibition floor under Exhibitors!
Loading...
Tue 22 - Additive Manufacturing
Topic Table – How to Implement Additive Manufacturing into your production process?
event_note Tuesday, 22 Sep 2020
query_builder 13:30 - 14:15 | Event time (GMT-5)
query_builder 13:30 - 14:15 | Your time (GMT)
place Online Session
card_travel Topic Table
mic English
Topic Table – How to Implement Additive Manufacturing into your production process?
During this 45-minute virtual roundtable you will get the opportunity to consult the experts on how to implement additive manufacturing.   
Get advice on:
  • Is additive manufacturing right for my specific product?
  • How easy would it be to implement?
  • What are the benefits of additive manufacturing to your business?
Loading...
Processing. Please wait.
Loading...